-
冬天工業超聲波清洗機的保養要注意什么?
-
可過濾循環的超聲波清洗設備介紹
-
中小型超聲波清洗機有什么使用共性嗎?
-
超聲波清洗機為什么不要用強酸強堿?
-
全自動超聲波清洗機在汽車制造業的應用范圍
-
恒溫超聲波清洗機的特點有哪些?
-
超聲波清洗適宜頻率有哪些?
-
低溫廢水回收設備的使用
-
多槽手動超聲波清洗機的使用
-
標準超聲波清洗機與非標準超聲波清洗機的區別
服務熱線電話
400-6188-756
超聲波清洗機指示燈亮,但沒有超聲波輸出是什么原因?
來源:http://www.qduv.cn/ 時間: 2022-07-25 瀏覽次數: 0
在使用超聲波的過程中,經常會遇到一些問題,比如超聲波清洗機的指示燈亮,但是沒有超聲波輸出,這究竟是什么原因呢?
In the process of using ultrasonic, we often encounter some problems, such as the indicator light of ultrasonic cleaning machine is on, but there is no ultrasonic output. What is the reason?
一、換能器出現故障
1、 Transducer failure
出現這種問題很可能是超聲波清洗機換能器出現故障,操作人員應該查看換能器與超聲波功率板的連接插頭,看看插頭是否松脫。超聲波換能器是比較容易受潮的,通過檢查,如果不是因?yàn)槭艹倍荒苷9ぷ?,那么很可能是換能器損壞了,要及時更換新的換能器。
This problem is likely to be caused by the failure of the transducer of the ultrasonic cleaning machine. The operator should check the connecting plug between the transducer and the ultrasonic power board to see if the plug is loose. The ultrasonic transducer is relatively susceptible to moisture. Through inspection, if it is not because of moisture and can not work normally, it is likely that the transducer is damaged, and it is necessary to replace it with a new one in time.
二、換能器振子燒壞
2、 Transducer vibrator burnt out
出現這種問題也可能是換能器振子脫膠,導致振子和振動面連接不好,終燒壞振子。操作人員是可以用萬用表來檢測振子是否出現斷路,如果燒壞要及時維修。
This problem may also be caused by the degumming of the transducer vibrator, resulting in poor connection between the vibrator and the vibrating surface, and finally burning the vibrator. The operator can use a multimeter to detect whether the vibrator is open circuit. If it is burnt out, it should be repaired in time.
除此之外,還有可能是穩壓管損壞,或者是電感以及隔離變壓器被燒毀。出現這種問題,超聲波清洗機操作人員一定要查明原因,及時。
In addition, there may be damage to the regulator, or the inductance and isolation transformer may be burned. In case of such a problem, the operator of the ultrasonic cleaning machine must find out the cause and solve it in time.
以上是為大家介紹的有關全自動超聲波清洗機的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.qduv.cn
The above is a detailed introduction about the full-automatic ultrasonic cleaning machine for you. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.qduv.cn
相關產品
相關文章
-
通過式噴淋清洗機:為什么洗不干凈? 2024-11-22
-
高壓去毛刺清洗機:遇見故障莫慌張,依次排查按文章 2024-11-21
-
單工位旋轉噴淋清洗機:為什么與其他清洗機相比要選擇它? 2024-11-20
-
碳?xì)淝逑礄C(jī):為何碳?xì)淝逑礄C(jī)會清洗的干凈 2024-11-18
-
超聲波清洗機的弊端 2024-11-16
-
高壓去毛刺清洗機的保養秘訣 2024-11-14
-
超聲波清洗機的工作原理 2024-11-12
-
了解噴淋清洗機的特點和應用 2024-11-07
-
如何使用碳?xì)淝逑礄C(jī)? 2024-11-05
-
污水低溫蒸發設備的結構運行特點有哪些? 2024-10-31