一般安裝在某些特定物件清洗的生產流水線上。

Generally installed on production lines for cleaning specific items.

典型的軟磁器件超聲波清洗設備介紹：被清洗物件從進料口可傳動的不銹鋼網帶送人超聲波清洗槽清洗，再經噴淋、烘干等工序后出料，實現被清洗物件可直接包裝入庫。各工序簡要說明如下：

Introduction to typical ultrasonic cleaning equipment for soft magnetic devices: The cleaned object is sent to the ultrasonic cleaning tank for cleaning through a stainless steel mesh belt that can be driven from the feeding port, and then discharged through processes such as spraying and drying, achieving direct packaging and storage of the cleaned object. A brief description of each process is as follows:

①進料：物件進料可采用半自動進料

① Feeding: Semi automatic feeding can be used for object feeding

②壓電式換能器目前國內外大多數超聲波清洗機用的是壓電式換能器，勘L形結構。

② Currently, most ultrasonic cleaning machines both domestically and internationally use piezoelectric transducers with L-shaped structures.

這種換能器一般有兩片壓電陶瓷晶片組成。一臺清洗機用多個換能器，經粘接劑粘接在清洗缸底部且經并聯聯接組成一臺清洗機的換能器。換能器基元之間距（對于頻率20kH4一般在5—10mm為佳，太大了容易產生彎曲振動，且振動板受到腐蝕，同時輻射面相對減少。

This type of transducer generally consists of two piezoelectric ceramic chips. A cleaning machine uses multiple transducers, which are bonded to the bottom of the cleaning cylinder with adhesive and connected in parallel to form a transducer for the cleaning machine. The distance between transducer elements (usually 5-10mm for a frequency of 20kH4) is optimal, as it is prone to bending vibration and corrosion of the vibration plate, while the radiation surface is relatively reduced.

通用超聲清洗機清洗零件適用性強，已廣泛應用于電子、鐘表、光學、機械、汽車、航空、原子能工業、醫療器械等許多行業。

The universal ultrasonic cleaning machine has strong applicability in cleaning parts and has been widely used in many industries such as electronics, clocks, optics, machinery, automobiles, aviation, atomic energy industry, medical devices, etc.

超聲波清洗機一般安裝在某些特定物件清洗的生產流水線上。

Ultrasonic cleaning machines are generally installed on production lines for cleaning specific objects.

典型的軟磁器件超聲波清洗設備，被清洗物件從進料口可傳動的不銹鋼網帶送人超聲波清洗槽清洗，再經噴淋、烘干等工序后出料，實現被清洗物件可直接包裝入庫。各工序簡要說明如下：

A typical ultrasonic cleaning equipment for soft magnetic devices, where the cleaned object is sent to the ultrasonic cleaning tank for cleaning through a stainless steel mesh belt that can be driven from the feeding port, and then discharged through processes such as spraying and drying, achieving direct packaging and storage of the cleaned object. A brief description of each process is as follows:

①進料：物件進料可采用半自動進料或出料：物件出料可采用自動收料或手工收料方式，格被清洗物件裝入包裝盒內。

① Feed: The object can be fed semi-automatically or discharged: The object can be discharged using automatic or manual feeding methods, and the cleaned object can be packed into the packaging box.

通過上述工序完成了物件實現利用超聲波清洗的全過程。

The entire process of using ultrasonic cleaning for objects has been completed through the above steps.

目前，還有一種超聲汽相清洗機，它是選用有機溶劑作清洗液，具有*的溶解污垢的能力，用于清洗半導體晶片等凈治度要求特別高的物件。

At present, there is also an ultrasonic vapor phase cleaning machine that uses organic solvents as the cleaning solution and has the ability to dissolve dirt. It is used to clean objects such as semiconductor chips that require particularly high cleanliness requirements.

本文由全自動超聲波清洗機為您提供，我們的網站是： http://www.qduv.cn我們將以全心全意的熱情為您提供服務，歡迎您的訪問！

This article is provided to you by a fully automatic ultrasonic cleaning machine. Our website is: http://www.qduv.cn We will provide you with wholehearted enthusiasm and welcome your visit!